RTI Drivers

RTI Drivers

One-way RTI Drivers are now available for WolfPack Modular and Fixed Matrix Systems from HomeTheatermation.com, an HDTV Supply Partner. HDTV Supply is pleased to announce that we have recently added RTI RS232 Drivers to support our WolfPack™ family of Matrix Systems that uses the RS232 port as the control method. The RTI driver controls only the Ins and Outs of the matrix. The RTI drivers are licensed to each matrix order and must be ordered again when the matrix order is placed. You cannot get them without ordering a matrix system. Call us at 833-WOLFPACK for more information if you need it.

These One-way RTI drivers were written and may be purchased from our Authorized HDTV Supply Partner:

Phil Caminiti
https://avaspro.com/ 
phil@avaspro.com
347-309-2626

Please call him directly as the transaction is between Phil & you as HDTV Supply is only passing you info to see if the drivers meet your needs. We do not warrant the RTI drivers.

NOTE: If you are ordering these for a past matrix order please give us that order number so we can make sure they are compatible with the matrix that you ordered. Failure to do so will delay your order. Call us if you have any questions.

Most of HDTV Supplys modular matrix systems are controllable directly through a RTI control devices. Talk to the above RTI installer about their control apps that mimic the layout of the onscreen interface and higher-priced touch-pad controllers. If your RTI control box is connected to your home network then you can launch the app, sign into your RTI account and get all the system and automation control right there on your phone or tablet, from anywhere in the house for a fee. Setting up a RTI system is usually not a DIY job and requires that you go through an authorized RTI dealer so contact RTI for one in your area.

4 - Examples of WolfPack 4K HDMI Matrix Systems using RTI Drivers...

$2,150 - CLICK WolfPack 16x16 HDMI Matrix Switch w/Video Wall, Scaling, Separate Audio, Apps & 100ms Switching

$2,800 - CLICK WolfPack 4K 18-18 HDMI Matrix Switch

$5,000 - CLICK WolfPack 4K 9x18 HDMI Matrix HDBaseT Switcher with 18-4K HDBaseT POE Receivers

$9,400 - CLICK WolfPack 4K 18x36 HDMI Matrix HDBaseT Switcher with 36-4K HDBaseT POE Receivers

Numerous Ways To Control Our WolfPack Family Of Modular Matrix Systems:

  1. Free iPad App (iOS)
  2. Free iPhone App (iOS)
  3. Free iPod App (iOS)
  4. Free Android Tablet App
  5. Free Android Phone App
  6. Free Samsung Galaxy Tablet App
  7. Free Samsung Galaxy Phone App
  8. Free Web GUI from any browser
  9. Dual RS232 ports
  10. Dual LAN (TCPIP) ports
  1. Front panel push-buttons
  2. Color Touchscreens
  3. Our WolfPack Sports Bar Control System
  4. Free One-Way Control4 Drivers
  5. 2-Way Control4 Drivers
  6. URC Drivers
  7. Elan Drivers
  8. RTI Drivers
  9. URC Drivers
  10. ...and more.

All can run concurrently with an RTI Home Entertainment System using our drivers. You now have access to over 2,000 Different WolfPack™ Modular HDMI Matrix Switchers to choose from with RTI™ drivers supporting 12-chassis sizes:

  1. 4x4
  2. 8x8
  3. 9x9
  4. 16x16
  5. 18x18
  6. 36x36
  1. 48x48
  2. 56x56
  3. 64x64
  4. 72x72
  5. 80x80
  6. 160x160

Why not buy an HDMI Matrix Switch with RTI Drivers today?

Compare Selected

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4×2 — 4 sources to 2 displays
  • 4×4 — 4 sources to 4 displays
  • 8×8 — 8 sources to 8 displays
  • 8×9 — 8 sources to 9 displays
  • 16×16 — 16 sources to 16 displays
  • 16×32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.